|
|
|
|
Documents:
|
|
|
INFORMATION DETAILS
ID: 13645122
|
Year: 2017
|
Make: Case IH
|
Model: 3020 25ft
|
Type: New
|
| MSRP:
N/A |
Engine Size - cc: N/A |
| Cutting width, ft in (m): | 25 (7.62) |
| Rigid or Flex: | Flex |
| Vertical Flex Range, in (mm): | 6 (152) |
| Single or double knife: | Single knife |
| Knife width: | 3 (76.2) |
| Knife speed, strokes per minute: | 2 x 575 = 1150 |
| Number of bats or tine bars: | 6 tine bars |
| Tine material: | Plastic or steel |
| Reel diameter, in (mm): | 42 (1067) |
| Reel speed, rpm: | 5 to 61 |
| Auger diameter, in (mm): | 26 (660) |
| Weight, width, lb (kg): | 5,302 (2405) |
SELLER DESCRIPTION
|
Flex Auger Heads
|
|
Enhance crop flow and improve feeding into the combine, resulting in smooth crop flow and reduced wear.
|
|
Frame
• Top frame beam is an impressive 6” X 6” in size
• The entire frame construction is fully welded, with welded-in back sheets.
• The auger floor is 4mm thick and fully welded
• Frame is designed to handle the toughest harvest conditions
|
|
Knife: Achieve Excellent Cut Quality
Reel Finger Timing
• The guard and knife, along with the rest of the cutterbar, ensure that down and tangled crop is picked up and properly cut
• The 3020 header comes standard with a 3-inch fine cut knife and guard
• The 3 inch knife provides excellent cut quality while promote high cutting speeds
Knife Drive
• Standard on all headers is a single heavy-duty high capacity wobble box knife drive
• The knife drive is belt driven from the left side of the head
• The 30 & 35 foot headers can be ordered with a dual knife drive
• The dual knife drive is recommended in heavy crop or when cutting across rows
Skid Shoes
• Reel positions sensors are located on both reel up/down and fore/aft
• Just as important as the cutterbar suspension are the skid shoes that support the cutterbar
• The 3020 header incorporates the same proven skid shoes used on the prior 1020 header
• The short profile allows the shoes to follow constantly changing ground conditions
• Since the pressure from the cutterbar is only spread over a small area on the skid shoes, it will prevent the header from “pushing” in soft or muddy conditions
|
|
Cutterbar: Superior TerraFlex Suspension System
TerraFlex™ Suspension System
• One of the most impressive features of the 3020 header, setting it apart from other auger heads is the TerraFlex suspension system
• Suspension design is the key to proper cutting in soft, muddy or hard field conditions
• With fewer mo​ving parts and reduced friction the cutterbar is reliable and responsive
• Provides flexible range of movement using a simple torsion block control
• Cutterbar has 3 inches up and 3 inches down of travel
Ridged Cutterbar Mode
​
• For cutting off the ground in crops such as wheat, the cutterbar can be locked ridged
• Cutterbar is locked ridged by moving a simple locking pin on each suspension arm
• This versatility also you to have a flexible cutterbar for cutting on the ground and a ridged when cutting off
Manually Adjustable Cutterbar
​
• Ground pressure is controlled and maintained by a fully adjustable Case IH TerraFlex torsion block
• Located between the main frame and the support arm
• Adjusted by manual adjustment screws on the back side of the header
In-cab Cutterbar Adjustment
​​
• Rather than having to actually stop the combine, get out, and manually adjust each bolt individually, the operator is able to chan​ge the down pressure on the cutterbar instantly from the comfort of the cab
• Adjustments are easily made from the cab while harvesting to accommodate ever-changing ground conditions
|
|
Auger: Smooth, Easy Feeding
Auger
• To promote grain quality and smooth, consistent crop feeding, the 3020 header uses a large 26-inch diameter auger
• Auger features 5-inch deep flighting to gently convey the crop from the cutterbar to the feeder
Auger Floor
• All 3020 Heads include as standard equipment a stainless steel auger floor for smooth, easy feeding
• The transition from the cutterbar to the auger floor provides an easy flow of crop over the front floor dam into the auger trough
Auger Drive
• The auger on the Case IH 3020 header is driven by a number 80 chain
• The chain ensures long chain life and positive auger drive even in tough crop conditions
Auger Adjustment
• The 3020 header promotes crop and header adaptability with a fully adjustable auger
• To fit the customer’s harvest needs, the auger can be adjusted both vertically and horizontally
|
|
|
3020 Highlights
|
|
The new 3020 Series flex heads provide the latest in flex head technology. |
|
Quick Specs
Cutting Width: 20, 25, 30, 35 ft
Knife Drive: Single D​rive (Standard), Duel Drive (Optional on 30 & 35 ft)
|
Back
|
|
|
|
Address:
