|
|
|
|
Documents:
|
|
|
INFORMATION DETAILS
ID: 13650813
|
Year: 2017
|
Make: Bush Hog®
|
Model: BH 20 Single-Spindle Rotary Cutters
|
Type: New
|
| MSRP:
N/A |
Engine Size - cc: N/A |
SELLER DESCRIPTION
|
Bush Hog® BH 20 Single-Spindle Rotary Cutters
BH20 Series (BH25, BH26, & BH27 Models)
Bush Hog’s Famous Reliability In A Medium-Duty Cutter
Bush Hog®’s BH20 Series Rotary Cutters bring our famous reliability to brush cutting and weed and grass mowing for farms, estates, and highway right-ofway mowing. Built with Bush Hog®’s tough features, this series delivers superior performance the first day on the job and for years to come.
|
|
Performance Features
|
-
Below Deck Structure of strongbacks and gearbox stand allows for a smooth top deck which sheds water and debris.
-
Continuously welded Side Bands tied together through the integrated gearbox stand.
-
Replaceable Full Length 1/4-Inch Skids run one-half the length of the deck to protect side bands and add strength that resists bending.
-
Floating Hitch for unlevel terrain
-
5-Year Gearbox Limited Warranty
-
Powder Coat Paint
-
Durable Tailwheel Beam
|
|
Construction Features
|
-
EZ Clean Sloped 10-Gauge Decks —eliminate trash build up and water traps.
-
Bush Hog® Gearboxes has splined output shafts with tapered roller bearings resist thrust and side loads as the pan pushes the cutter up or to the side of large obstacles like rocks or stumps.
-
Powder Coat Paint in colors that match today’s tractors is baked on to resist rust and nicks through years of rugged work.
-
Tail Wheel Beam has 3/16-inch wall and is clamped between two heavy steel plates for a secure fit to resist side loads during turns. Dual tail wheels available on BH27.
-
5-Year Gearbox Limited Warranty comes with each new BH20 Series Cutter.
-
1/4-inch continuously welded sidebands formed of 1/4-inch thick steel and12 1/2-inches deep for large volumes of material.
-
130 HP Bush Hog® Gearbox
|
|
|
Models
|
BH25 |
BH26 |
BH27 |
|
Cutting Width |
5-Feet |
6-Feet |
7-Feet |
|
Cutting Capacity |
3-inch diameter |
3-inch diameter |
3-inch diameter |
|
Cutting Height |
1 1/2 to 10 1/2-inches |
1 1/2 to 10 1/2-inches |
1 1/2 to 10 1/2-inches |
|
Dimensions (transport width x length) |
5-feet 6-inches x 8-feet 8-inches |
6-feet 6-inches x 9-feet 8-inches |
7-feet 6-inches x 10-feet 8-inches (single wheels) 10-feet1-inch (double wheels) |
|
Type Hitch |
3 Point Cat. I, Cat. II Standard & QH |
3 Point Cat. I, Cat. II Standard & QH |
3 point, cat II & III, standard and QH. |
|
Deck Thickness |
10-gauge |
10-gauge |
10-gauge |
|
Sidebands |
1/4x 12 1/2-inches |
1/4x 12 1/2-inches |
1/4x 12 1/2-inches |
|
Driveshaft |
ASAE Category 4 |
ASAE Category 4 |
ASAE Category 4 |
|
Gearbox |
130 HP |
130 HP |
130 HP |
|
Tractor PTO Speed |
540 RPM |
540 RPM |
540 RPM |
|
Driveline Protection |
Slip Clutch Standard |
Slip Clutch Standard |
Slip Clutch Standard |
|
Blade Holder(s) |
Round |
Round |
Round |
|
Blades |
1/2 x 4-inch uplift |
1/2 x 4-inch uplift |
1/2 x 4-inch uplift |
|
Blade Tip Speed |
14,600 FPM |
15,000FPM |
14,450 FPM |
|
Tires |
Single Laminated |
Single Laminated |
Single Laminated |
|
Minimum Tractor HP |
35 PTO |
45 PTO |
55 PTO |
|
Safety Shielding |
Front and Rear Deflectors or Front and Rear Chains |
|
Approx. Weight |
906 lbs |
1095 lbs |
1328 lbs |
|
Back
|
|
|
|
Address:
Adjustable Slip Clutches are standard equipment.
Solid Deck Reinforcements. Decks are reinforced with internal 7-gauge steel strongbacks that run the full length of the deck, tying together the entire structure with the gearbox stand. Bush Hog® blade pans are round to allow the mower to float over field obstructions.
Quick Detach Gearbox Shield
Floating Hitch for unlevel terrain
