|
|
|
INFORMATION DETAILS
ID: 13650975
|
Year: 2017
|
Make: Farm King
|
Model: Backsaver Auger - 10 / 13 / 16
|
Type: New
|
| MSRP:
N/A |
Engine Size - cc: N/A |
SELLER DESCRIPTION
|
Farm King has been manufacturing backsaver augers for more than four decades. The same principles used back then still apply today when choosing materials that go into every auger, grade A steel and functional design. Models range in lengths of 50 to 104 feet accompanied by 10, 13 and 16-inch tube sizes. A patented bridge –like support system allows the auger tubing and flighting to remain stable at all times including raising and lower of the auger. The hydraulic scissor lift resurrects the auger in virtually no time at all. When the spout is in the desired location, a safety hydraulic ball valve can be adjusted to ensure the augers stays when and where you want even in unpredictable weather. The recommended horsepower for peak operation ranges from 40-175 depending on auger size. |
|
Features
|
The self-leveling hopper on the swing-away auger remains level even when the main auger is elevated to its maximum height. A single flighting hopper is standard on the 10" and 13", while the optional dual flighting low-profile hopper (standard on the 16") reduces hopper height by more than 2-1/2". The swing-away auger can be positioned on the right side or left side of the auger, adding flexibility for yards with limited space or restricted access. A power mover, optional on the 10" and 13" and standard on the 16", uses two hydraulic motors that move the swing-away auger, limiting the physical labor required. The tapered thrust bearing at the top of the auger is torqued to remove pressure on the bottom end bearing for longer life and better wear.
Farm King Backsaver Augers feature two internal gearboxes for the intake auger assembly. Easy to maintain and service, these gearboxes do not restrict auger capacity. Cleanout is simplified with an optional reverse kit and an underside access panel.
The scissor lift undercarriage, exclusive to Farm King Backsaver Augers, requires less hydraulic pressure to raise and lower the auger. The wide undercarriage is stable and solid while still meeting transportation requirements. When the auger is at the desired position, a shut-off valve on the underside of the tube limits the circulation of the hydraulics so the auger will maintain its height. |
|
Specifications - 10" / 13"
|
|
Model |
1050 |
1060 |
1070 |
1080* |
|
Size |
10" x 50' |
10" x 60' |
10" x 70' |
10" x 80' |
|
Tubing |
12 gauge |
|
Flighting |
7 gauge |
|
Flighting shaft |
11 gauge, 2-3/8" diameter |
|
Undercarriage |
3" x 3" x 1/8" square tube |
|
Lift arms |
2" x 5" x 3/16" tube |
|
Bridging |
3/8" cable on 50' and 60' models, 1/2" cable on 70' and 80' models |
|
Wheels and hubs |
15" with 5 bolt automotive type hubs and bearings |
|
Swing auger drive |
Two internal gearboxes (PTO driven), sprocket and chain |
|
Hopper dimensions |
43-1/2" x 60" |
|
Standard hopper height from ground* |
15-1/4" at heel end, 14-1/4" at other end |
|
Multi flighting hopper height from ground* |
11-3/4" at both ends |
Tractor requirements
- min. PTO hp (w/540 RPM PTO)
- approx. hydraulic requirements for lift |
40
1000 PSI |
48
1000 PSI |
55
1000 PSI |
65
1000 PSI |
|
Hitch weight |
- |
- |
840 lb |
|
|
Weight |
2545 lb |
2987 lb |
3354 lb |
3622 lb |
|
|
Model |
1370 |
1385 |
1395* |
|
Size |
13" x 70' |
13" x 85' |
13" x 95' |
|
Tubing |
All sections 12 gauge |
|
Flighting |
1/4" flighting in swing-away and main auger |
|
Flighting shaft |
11 gauge, 2-3/8" diameter |
|
Undercarriage |
70' - 3-1/2" x 3-1/2" x 3/16" square tube;
85' and 95' - 4" x 4" x 1/4" square tube |
|
Lift arms |
1/4" formed tubing upper, 7 gauge lower |
|
Bridging |
1/2" cable |
|
Wheels and hubs |
15" with 6 bolt automotive type hubs and bearings |
|
Swing auger drive |
Two internal gearboxes (PTO driven), sprocket and chain |
|
Hopper dimensions |
43-1/2" x 60" |
|
Standard hopper height from ground* |
16-3/4" at heel end, 16-1/4" at other end |
|
Multi flighting hopper height from ground* |
12-3/4" at both ends |
Tractor requirements
- min. PTO hp (w/540 RPM PTO)
- approx. hydraulic requirements for lift |
80
1200 PSI |
90
1200 PSI |
100
1200 PSI |
|
Hitch weight |
1140 lb |
1270 lb |
|
|
Weight |
5175 lb |
6381 lb |
6683 lb |
|
|
|
|
Model |
1050 |
1060 |
1070 |
1080* |
1370 |
1385 |
1395* |
|
Wheel track |
9' |
10' |
12' |
12' |
12' |
12' |
12' |
A, height †
- lowest
- half way
- highest |
11' 2"
23' 6"
36' |
11' 3"
27' 6"
43' 8" |
12' 6"
30' 3"
48' |
13' 6"
34' 3"
55' |
13' 7"
31' 9"
50' |
13' 8"
36' 6"
59' 6" |
14' 8"
40' 6"
66' 4" |
B, forward reach
- lowest
- half way
- highest |
26'
-
18' |
30' 3"
-
22' 3" |
35' 8"
33' 5"
27' 10" |
45' 7"
41' 10"
34' 9" |
36' 11"
33'
27' 5" |
45' 4"
39' 8"
31' 10" |
55' 4"
48' 3"
38' 9" |
|
|
|
All measurements taken with 18" hitch height. ‘A’ lowest is overall transport height, half way and highest are spout to ground measurements.
*includes 10' extension. |
|
Specifications - 16"
|
|
Model |
1684 |
16104 |
|
Size |
16" x 84' |
16" x 104' |
|
Tubing |
Tubes 1 and 2: 10 gauge
Tubes 3 and 4: 11 gauge |
Tubes 1 and 2: 10 gauge
Tubes 3, 4, 5: 11 gauge |
|
Flighting, thickness |
¼" on swing and main auger |
|
Undercarriage |
5" x 5" x ¼" square tube |
|
Lift arms |
¼" formed tubing |
|
Bridging |
Upper bridging - ¾" cable |
Upper bridging - ¾" cable
Side bridging - ½" cable |
|
Wheel and hubs |
6 bolt hubs, 11 L x 15 x 8 ply |
8 bolt hubs,
16.5 L x 16.1 x 10 ply |
|
Hopper dimensions, width x length x height |
48" x 60" x 13-½" |
|
Clearance in down position |
13' 2" |
14' 10" |
|
Below spout to ground @ maximum lift |
57' |
77' 4" |
|
Below spout to ground in down position |
10' 2" |
12' 5" |
|
Reach - edge of wheels to center of spout down position |
44' 10" |
57' 8" |
Reach - edge of wheels to center of spout
½ up position (44' 3" spt-grd) |
42' |
52' |
Reach - edge of wheels to center of spout
up position |
33' 4" |
36' 1" |
|
Tube angle, up position |
44° |
44° |
|
Tube angle, down position |
5° |
5° |
|
Wheel track outside of wheels |
13' 4' |
14' 5-½" |
|
Hitch weight in down position |
2,200 lb |
2,700 lb |
|
Overall weight |
11,000 lb |
13,000 lb |
Tractor requirements
- Minimum PTO horsepower
(w/1000 RPM PTO)
- Approximate hydraulic requirements for lift |
150 hp
1500 PSI |
175 hp
1500 PSI |
|
Back
|
|
|
|
Address:
