|
|
|
|
Documents:
|
|
|
INFORMATION DETAILS
ID: 13651903
|
Year: 2017
|
Make: Sunflower
|
Model: 9312
|
Type: New
|
| MSRP:
N/A |
Engine Size - cc: N/A |
SELLER DESCRIPTION
A Simple Multi-Function, Pull Type Pasture Drill
Ideal for pastures which require re-seeding due to drought or over grazing. The Sunflower Pasture Drill is also used effectively for seeding along highways and electrical highline right of ways. Smaller farming operations have found this tough, compact grain drill can handle all of their conventional and no till seeding needs. Sunflower's 9312 end wheel design positions the all purpose openers and the end wheels in line for uniform performance - even on rough terrain. When seeding side hills and sloped fields, the end wheels act as stabilizers to hold the openers steady and do not subject the openers to the extreme side pressures encountered by caddy mounted units. The tough 9312 Pasture Drill is built with the same heavy frame and quality guidelines as the rest of Sunflower's grain drill line. You just can't find a more durable grain seeder! Available in 7 1/2', 10' and 15' models.
|
|
Features
|
Extra Heavy Frames
Heavy duty 3/8" thick 7" x 7" main frames are coupled to a 3/8" thick 3" x 5" opener frame to create a sound foundation for all Sunflower grain drills.
9300, 9400, 9500, 9600 series drills
|
|
All Purpose “Heads Up Opener
All-purpose openers feature wide set 1/2” parallel links for better depth control and “dead on accuracy” in seed placement. Two 400lb. retention springs can generate 420+lbs at the pinch point of the opener blade! Down pressures can be easily adjusted from no-till to conventional seeding without the need of tools. 15” diameter x 3.5mm “Heads Up Opener Blades” eliminate pairing of rows, premature leading blade wear and side loading of bearings.
9300, 9400, and 9500 series drills
|
Conventional Opener
The single arm mount conventional openers are mounted at an 8-inch stagger to promote residue flow through the seeding system. The single point mount bearing is protect by UHMW bearings to prevent wear and reduce service time. The pneumatic down pressure system maintains an even down pressure on all row units and eliminates the down pressure spikes that occur with spring activated down pressure systems.
9600 series drills
 |
Seed Hoppers
With the largest seed hoppers in the industry ranging in seed capacity from 2.4 to 3.75 bushels per foot, the all welded boxes are constructed of heavy 16 gauge steel with 3/16 inch thick end plates. The bolt in hopper bottoms allow multiple row spacing using the same hopper.
9300 series (2.4 bu.), 9421 & 9600 (3.0 bu.) series, 9400 & 9500 series (3.75 bu.),
 |
Seed Meters & Adjustments
The infinitely variable meters are very gentle on seeds and provide a continuous flow of material unlike fluted meters that drop seed in groups. This has a better singulation affect than dumping small groups of seed as found in fluted meter operations. Rates are easily changed with a lever adjustment system on each hopper system.
Seed Meter: All models
Adjustment Lever: 9435, 9531 and 9600 series
|
Walk Boards
9000 series drills sport an automatically locking walk board. Lift the walk board to the raised position and the lock will engage, placing the pin in the lock position will ensure it will stays locked.
The walk board is deep for operator safety and the ladder simply folds over the walk board rather than under it. Attached to the ladder mount is a folding handle to assist the operator in mounting the walk board. When not in use it easily folds down for storage.
Walk Boards: All models
Assist Handle: 9435, 9531 and 9600 series
|
Back
|
|
|
|
Address:
