|
|
|
INFORMATION DETAILS
ID: 13665670
|
Year: 2017
|
Make: Kverneland
|
Model: Taarup 853 PRO - 856 PRO
|
Type: New
|
| MSRP:
N/A |
Engine Size - cc: N/A |
SELLER DESCRIPTION
|
Kverneland Taarup 853 Pro and 856 Pro with Increased Blowing Distance and Blockage-Free Dosing
The new Kverneland Taarup 853 PRO and 856 PRO have seen a number of updates compared to the well-established Kverneland Taarup 850 bale chopper range, to meet the highest demands when it comes to operator comfort and blockage-free operation.
The new Pro series of bale choppers offers a strong package of new features such as redesigned flywheel, new 3-stage swiveling chute, patented feed control system and remote control of tailgate and floor chain.
|
|
The Advantages:
|
-
3m³ and 6m³ chamber.
-
Blowing distance up to 25m.
-
New 3-stage swivelling PRO chute.
-
On 853 Pro - Drum Feed Control System - Blockage-Free Design
-
Optimsed feeding and bedding.
-
Unique drum-knife configuration to handle a wide variety of materials.
-
Two speed gearbox for reduced flywheel speed when discharging feed materials.
|
|
Technical Specifications
|
|
|
|
|
Cubic Volume |
Load Capacity |
Power Req, Min. |
|
853 PRO |
3.0m3 |
1700kg |
48/65 kW/hp |
|
856 PRO |
6.0m3 |
3000kg |
56/75 kW/hp |
|
|
|
|
Highlights
|
 The Pro Chute
-
The Pro chute operates in 3 stages to optimize the blowing distance for bedding
-
Blowing distance up to 20m.
-
Designed with a turning radius of 260° which enables easy access to even difficult reachable spaces.
-
The 3-stage movement enhance the feeding perfomance without blockage even on long fibrous material.
|
Flywheel Configuration for 853 Pro and 856 Pro
A new flywheel configuration has been developed for the Kverneland 853 Pro and 856 Pro.
-
The features in construction designed 3-stage swivel chute enables the perfect combination of extensive blowing distance and feeding into high troughs
-
To maximise airflow the 1.55m diameter flywheel is fitted with 6 large front blower paddles.
-
The flywheel features 3 main paddles for an increased intake of material from chamber to flywheel.
-
The flywheel does not chop the straw, thus ensures virtual full length material suitable for bedding of covered yard areas.
|
Drum Feed Control System
-
The Drum Feed Control System (DFCS) is an exclusive feature (patent pending) on the 853 Pro, designed to handle even the most difficult material when feeding.
-
It is a simple and reliable system, which includes a powerful electric cylinder and a comb positioned above the drum.
-
During loading DFCS is engaged, which means that the comb is in a lowered position.
-
This ensures that blockages of the flywheel is minimized during the loading and start up process.
-
Once the flywheel speed is at a sufficient level, all you need to do is to push a button and the DFCS ‘fingers’ will be gradually disengaged and open for full flow through the flywheel resulting in
-
perfect flow.
-
The progressive release of the ‘fingers’ offers a more gentle start, protecting the machine and minimizing the risk of blockages.
-
A reliable and simple system with minimum maintenance!
|
Two Speed Gearbox
-
To provide the correct flywheel speed for bedding and feeding the Kverneland 853 and 856 are fitted with a two speed gearbox.
-
At lower speeds the flywheel ensures a metered flow of silage or hay for feeding.
-
At high speed a powerful blow for the most efficient distribution during bedding is ensured.
-
The gearbox speed is adjusted via the handle on the side of the machine.
|
Drum-Knife Configuration
-
The Kverneland 850 range includes a unique drum – knife configuration.
-
Standard on models 853 & 856, the knives are mounted on angled rings so that they pass a fixed ‘comb’ on alternative sides.
-
This ensures that materials are cut and fed into the flywheel chamber evenly, reducing the risk of blockage, offering even discharge & leaving the drum and comb clean.
-
The drum is fitted with 14 blades as standard, but will accept a further 28 blades according to material type – simply bolt them on in a matter of minutes.
-
A patented system - the knives pass the fixed comb on alternative sides for a more even cut.
|
Easy Loading of Bales
-
The hydraulically operated rear door fitted to 800 series provides a self loading facility for easy loading of square and round bales.
-
The rear door also offers the ability to carry a second round bale for increased capacity.
-
A bale kit can be fitted to the end of the tailgate to ensure that the bales stay in position during operation.
-
The size of the bale chamber makes it very easy to load the material with a loader - and two round bales can be loaded at the same time - saving time.
|
|
Back
|
|
|
|
Address:
