|
|
|
INFORMATION DETAILS
ID: 14318156
|
Year: 2019
|
Make: JCB
|
Model: 504-13 Telescopic Handler
|
Type: New
|
| MSRP:
N/A |
Engine Size - cc: N/A |
| Net Engine Power: | 39 hp 29 kW |
| Maximum Lift Capacity: | 4,000 lb 2,000 kg |
| Maximum Lift Height: | 13 ft 3 in 4.04 m |
SELLER DESCRIPTION
|
The JCB 504-13 Loadall is compact, maneuverable telescopic handler with impressive lift capacity and reach for its size.
Permanent 4-wheel steering and compact size enable an exceptionally tight turning circle for great maneuverability and handling in small spaces. This makes the 504-14 is ideally suited to working in greenhouses to parking garages, rental lots to construction sites.
Four equal-sized wheels improve tractive effort for excellent loader performance, soft-ground flotation and ground clearance.
The 504-13 Loadall is available with skid steer or compact tool carrier attachment coupler. JCB’s large range of available attachments add to the 504-13’s versatility, utilization and return on investment.
Like all JCB telehandlers, the 504-13 returns excellent residual values; as the world's leading manufacturer of telehanders, JCB Loadall’s are always in demand.
|
|
Features
|
-
Hydrostatic transmission
-
Permanent 4-wheel steer, 4-wheel drive
-
Skid steer or compact tool carrier attachment coupler
-
All steel body work
-
Comfortable operator station
-
39 hp (29 kW) hp JCB Perkins engine with no required aftertreatment
-
Maximum lift capacity of 4,000 lb (1815 kg)
-
Maximum lift height of 13 ft 3 in. (4.04 m)
|
Comfort & Ease of Use
The JCB 504-13 telescopic handler has a large, spacious cab with a wide access door. The cab glass is tinted all round and the windshield and roof are laminated.
JCB 504-13 controls are comfortable, precise and smooth thanks to single-lever electro servo controls with proportional auxiliaries.
Telehandler operators can maneuver quickly and easily with directional shuttle changes possible via the shuttle lever on the steering column or the joystick-mounted shuttle switch. |
Productivity & Performance
For excellent traction and performance in difficult conditions, the JCB 504-13 Loadall telehandler is features 4-wheel drive as standard. A limited-slip differential is available for maximum traction on slippery surfaces by transferring drive from the spinning wheel to the stationary wheel.
With a low height of 6 feet 6 inches and a narrow width of 5 feet 1 inch, this JCB Loadall telehandler is able to work in small operating environments, while its compact wheelbase and large steering lock angles ensure tight turning circles and superior maneuverability.
The 504-13 is equipped with a 39 hp JCB Perkins engine requires no aftertreatment and produces 120 lb-ft of torque at 1800 RPM.
|
Visibility & Security
The 504-13 Loadall telehandler features a low boom pivot point and slim outer boom for unmatched visibility to front and rear wheels on the right-hand side. Bystanders are further safeguarded by the standard-fit reversing alarm.
Hose burst check valves (HBCVs) prevent the rams from collapse in the event of a hose failure.
GPS tracking via JCB LiveLink telematics systems provides real-time location data, including geofencing alerts to let you know if your machine is being used beyond predefined boundaries.
|
Back
|
|
|
|
Address:
